Barry-Wehmiller Network

G-Grafix Flexo Folder Gluer

The G-Grafix Flexo Folder Gluer from BW Papersystems has a simple and robust design that is easier to operate and maintain than previous generations of Flexo Folder Gluers. This alone makes it a valuable addition to your production line; but that’s not all.

Flexo-Folder-Gluer-Side Flexo-Folder-Gluer Flexo-Folder-Gluer-Printing-Unit Flexo Folder Gluer: Corrugated Cardboard Boxes Flexo Folder Gluer: Corrugated Box with Inside Printing Flexo Folder Gluer: Die Cut Vegetables box

9.24 (37.96) G-Grafix Flexo Folder Gluer – 37.5" x 96" (950 mm x 2440 mm)

            Minimum folded box:                        11.5” x 11.75” (292 mm x 299 mm)

            Maximum folded box:                        35” x 48” (889 mm x 1220 mm)

            Minimum square box:                        6.125” x  6.125” (155 mm x 155 mm)

            Maximum square box:                       24” x 24” (610 mm x 610 mm)

            Maximum Print Surface length:         92.5” (2350 mm)

            Sheet caliper:                                     .04” – .4” (1 mm – 10 mm)

            Maximum Speed:                               up to 350 sheets/minute


12.29 (50.113) G-Grafix Flexo Folder Gluer – 50” x 113” (1270 mm x 2870 mm)

            Minimum folded box:                        13.5” x 11.75” (343 mm x 299 mm)

            Maximum folded box:                        45” x 53.5” (1143 mm x 1359 mm)

            Minimum square box:                       7.75” x  7.75” (197 mm x 197 mm)

            Maximum square box:                       26.75” x 26.75” (679 mm x 679 mm)

            Maximum Print Surface length:         107” (2718 mm)

            Sheet caliper:                                     .04” – .4” (1 mm – 10 mm)

            Maximum Speed:                               up to 250 sheets/minute


16.32 (66.125) G-Grafix Flexo Folder Gluer – 66" x 125" (1676 mm x 3175 mm)

            Minimum folded box:                        18” x 12.25” (457 mm x 311 mm)

            Maximum folded box:                        61” x 61” (1549 mm x 1549 mm)

            Minimum square box:                       8.125” x  8.125” (206 mm x 206 mm)

            Maximum square box:                       30.5” x 30.5” (775 mm x 775 mm)

            Maximum Print Surface length:         118.75” (3016 mm)

            Sheet caliper:                                     .04” – .4” (1 mm – 10 mm)

            Maximum Speed:                               up to 200 sheets/minute

Lead-Edge Feeder with Extended Feed

The MarquipWardUnited Extended Feed Lead-Edge Feeder combines long wearing urethane feed belts with extreme gripping characteristics, a vacuum table, low crush feed rolls, and an extended stroke to provide registration and maximum sheet control while maintaining physical and aesthetic sheet quality. An optional Variable Stroke Feeder is available to minimize board crush.

Flexographic Print Section

The MarquipWardUnited flexographic print station provides precision control of registration by a harmonic drive register system. Impression, sheet transfer, and ink metering provide the capability to print top quality, value-added: process, fine screen, and block work with quick and easy changeover for specific jobs.

Vacuum Transfer Print Stations

This transfer system provides constant surface speed for life of the belt. This minimizes problems of warped board and enhances print registration.

Folding Section

The folding rails allow for a gentle, gradual rate of fold for quality and consistency. A vacuum over the entire rail length dramatically reduces fishtail and folder jams. The folding rods and holders provide increased range of motion, more ergonomic adjustment and better durability.

Forming and Ironing Wheels

A proper score is essential to produce a square box and acceptable manufacturer’s joint. The Forming Wheels pressure the box to achieve the desired joint gap and the Iron Wheels suppress the boxes to give a consistent edge and 'memory' to the fold.

Counter Ejector

MarquipWardUnited offers a top loading counter ejector on the G-Grafix for an economical, simplistic method for stacking, counting and ejecting bundles.

A Legacy of Durability

The G-Grafix line maintains the great quality of high- performance, accurate feeders, rugged rotary die cut sections and the ability to continuously handle a wide-range of product designs and configurations.

  • Inside Printing
  • Serrapid Quick Mount Die System
  • Chambered Doctor Blades
  • Servo-Driven Die Cutter
  • Shark Anvil Trimmer
  • Variable Stroke Feeder
  • IR Dryers
  • Trim Chopper
  • Folder Dust Collection
  • Wide Counter Ejector




Customer Service Helpdesk Is it urgent? Call us 24 hours a day, 365 days a year